Worry-Free Corsair SSD Clone Software Download (2 Options)

Why Clone Hard Drive Corsair SSD?

Cloning hard drive to Corsair SSD is a popular choice, especially for users seeking performance, speed, durability, etc. Below is a detailed comparison of traditional HDDs versus Corsair SSDs:

Feature	Traditional HDD	Corsair SSD
Overall Performance	Average	Significantly Improved
Average Boot Speed	30-60 seconds, or even longer	10-20 seconds; Faster SSD, i.e., NVMe, may take 5-10 seconds.
Average Access Time	5-10ms	25-100 µs
Power Consumption	Higher	Lower
Noise Level	Audible spinning	Silent
Durability (Shock Proof)	Less durable	More durable
Heat Generation	Moderate to high	Low
Lifespan	Moderate (3-5 years)	Higher (5-10 years)

About Corsair SSD and Hard Disk Drive Cloning Kit

The Corsair SSD and Hard Disk Drive Cloning Kit typically includes EZ Gig IV and Corsair SSD Toolbox. EZ Gig IV is the primary cloning software bundled with the kit. It's user-friendly and can copy all the data, operating system, applications, and settings from the old drive to a new drive.

Corsair SSD Toolbox is a separate software offered by Corsair that is primarily used for Corsair SSD management and optimization. It also includes the "Disk Clone" feature. But it might not be compatible with all Corsair SSD models.

Key Features of EZ Gig IV:

User-friendly Interface: Designed to be easy to use, even for users with limited technical experience.

Simple Plug and Clone Process: Copies everything from the old drive to the new drive, eliminating the need to reinstall the operating system and applications.

Data Select Feature: Allows you to deselect certain data folders during cloning. This can be helpful when migrating from large HDD to smaller SSD or creating a bootable drive with the operating system and essential applications.

Steps to Clone Corsair SSD using EZ GIg IV

Step 1. Double-click the EXE file of EZ Gig to open it. On the Startup Options page, click Start EZ Gig IV.

Step 2. After loading, click Let’s Get Started. It will automatically scan all available drives on the computer. This may take several minutes.

Step 3. Select the source disk and the Corsair SSD subsequently. Remember to click Next after each selection.

Step 4. On the Data Select window, exclude the data folder you don’t want to clone. Then, click Next.

Step 5. At last, click Start Clone. It will try to clone and make the cloned Corsair SSD bootable.

Worry-Free Corsair Clone Software Alternative to Clone SSD

While the Corsair SSD and hard disk drive cloning kit includes EZ Gig IV, you may encounter issues with the software, e.g., EZGIG IV not recognize drive, read errors, cloning failed, etc., or prefer a simple and worry-free Corsairclone software alternative, such as AOMEI Cloner.

It allows you to clone the entire disk, either HDDs or SSDs, and is compatible with all brands of SSD disks, such as Samsung, WD, SanDisk, Crucial, etc., including Corsair, whether they are NVMe, PCIe, M.2, SATA, or mSATA, even with different sizes.

Notes:✎...

Backup files to external hard drive if there is any important data on the target SSD drive as it will be overwritten or deleted.

Connect the Corsair SSDto your computer using SATA to USB adapter.

Check the disk partition style and be sure they both use MBR or GPT.

Step 1.  Open AOMEI Cloner after installing. Then, click Clone > Disk Clone subsequently.

Step 2. You will then be asked to select the source disk and destination disk (Corsair SSD with equal or larger capacity). Just do as suggested and click Next after each selection.

Step 3. In the warning window, click OK to confirm you want to clone Corsair SSD.

Step 4. Now, you need to configure some settings to make the cloning process smooth. Be sure to check the SSD Alignment feature to align HDDand SSD for better performance. You can also enjoy the Edit Partitions feature in the following two situations.

Step 5. Be sure your settings and click Start Clone to clone HDD to Corsair SSD. By default, this software will enable the intelligent clone feature to clone only the used sectors of a drive. It can avoid the cloned SSD won’t boot issue to the greatest extent possible (if it’s smaller).

Download it to have a try if you want a fast and worry-free Corsair SSD clone software!

After cloning, you still need to replace hard drive with a Corsair SSD in your laptop or desktop and set the new SSD as the primary drive in BIOS. So you can boot from it successfully.

• Press the power button and wait a few seconds to make sure the computer is off completely. Unplug power source and disconnect the battery as well.
• Remove the screws on the back cover and open it carefully.
• Then, locate the hard drive slots and unscrews the screws securing it.
• Gently slide the Corsair SSD into it at a proper angle. Please secure it with the screws.
• Reinstall the back coverand secure it with the screws.
• Now, you can try to set the Corsair SSD as the primary drive in BIOS and boot from it.

Corsair Cloning Kit vs. AOMEI Cloner: Which One Should You Choose?

Comparison	EZ GIG IV	AOMEI Cloner
Cost	$19.9	$49.95
Supported OS	Windows	Windows 7/8/8.1/10& servers
Disk Clone	√	√
System Clone	√	√
Clone to Smaller Disk	√	√
Create Bootable Media	√	√
Partition Clone	-	√
Sector by Sector Clone	√	√
Edit Partitions	-	√
SSD Alignment	Partial	√
Command Line Clone	-	√
Non-Corsair Drives Compatible	-	√
Disk Interface	Only 2.5” or 3.5”SATA HDDs/SSDs with adapter and M.2 SATA SSDs with enclosure	SATA, M.2, PCIe, mSATA

• - means does not support.
• √ means supported.

🥇Final Recommendation:

• Use EZ-GIG IV only for straightforward SATA-to-SATA cloning.
• For a hassle-free cloning process, AOMEI Cloner is more compatible.

Closing Words

Corsair offers users with SSD and hard disk drive cloning kit, but it charges $19.9. But it lacks some useful features during cloning, such as SSD Alignment, Edit Partitions, etc. Also, it is limited in terms of operating system, disk brand, and interface.

Thus, it’s suggested to use a simple and hassle-free cloning software like AOMEI Cloner. It can perform the cloning process better without boot issues. It’s feature-rich and compatible with all brands of HDDs and SSDs and interfaces.

FAQs About Corsair Clone Software

Q1: Can I use Corsair’s cloning kit with non-Corsair SSDs?

Generally no. The Corsair kit is designed for Corsair-branded drives and may not work properly with others.

Q2: Will the cloned Corsair SSD be bootable?

In general, yes, the cloned Corsair SSD is still bootable if you use a reliable cloning software. But some users still find that the cloned SSD won’t boot. It may be due to a corrupted cable, loose connection, wrong boot mode, partition style, missing system reserved partition, etc.

Q3: Do I need to format the Corsair SSD before cloning?

No, it’s not necessary to format the Corsair SSD before cloning, as most cloning software handle the partitioning and formatting during the process to make sure you can clone SSD to Corsair SSD without boot issues.

Q4: Can I clone larger HDD to smaller Corsair SSD?

Yes, you can clone large HDD to smaller Corsair SSD in reliable cloning software like AOMEI Cloner as long as the used space on the original drive is smaller than or equal to the Corsair SSD. It will automatically use the Intelligent clone mode to clone only the used sectors of the original drive.

Q5: Does Corsair have cloning software?

Corsair provides users withSSD and Hard Disk Drive Cloning Kit, including a USB 3.0 cable for connecting a 2.5" SSD or notebook hard drive, and automated software for copying hard drive data to Corsair SSD. However, unlike other brands, it's not free and users will have to pay $19.90.

Need a fast and worry-free way to clone your disk to Corsair SSD? AOMEI Cloner is your answer.