Encountering a "boot device not found" error can be frustrating and disruptive to your workflow. In this article, we delve into the root causes behind this common issue and provide a step-by-step guide to troubleshooting and resolving it.
Facing a "boot device not found" error message upon starting your computer can be alarming, especially if you rely on your device for work or personal use. This error indicates that your computer is unable to locate the primary boot device, usually the hard drive or SSD, necessary to load the operating system. In this comprehensive guide, we explore the various reasons behind this issue and offer practical solutions to resolve it.
Before delving into solutions, it's essential to understand why this error occurs. The "boot device not found" error message typically appears when:
✲ The Boot Order is Incorrect: Your computer may be attempting to boot from an incorrect device, such as a USB drive or network boot, instead of the primary hard drive or SSD.
✲ Hardware Failure: Issues with the hard drive, SSD, or connecting cables can prevent the system from detecting the boot device.
✲ Corrupted Boot Sector: A corrupted boot sector or master boot record (MBR) can disrupt the boot process and lead to the error message.
✲ BIOS/UEFI Settings: Incorrect BIOS or UEFI settings, such as disabled SATA ports or secure boot settings, can cause the boot device not found error.
✲ Software Issues: Operating system corruption or missing system files can also result in this error.
Now, let's explore each potential cause in more detail and discuss troubleshooting steps to resolve the issue.
1. Incorrect Boot Order:
Cause: The BIOS or UEFI firmware is configured to boot from a device other than the primary hard drive or SSD.
Solution:
Restart your computer and access the BIOS/UEFI settings by pressing the designated key during startup (usually Del, F2, F12, or Esc).
Navigate to the boot order or boot priority section.
Ensure that the primary hard drive or SSD is set as the first boot device.
Save the changes and exit the BIOS/UEFI settings. Restart your computer and check if the error persists.
2. Hardware Failure:
Cause: A malfunctioning hard drive, SSD, or connecting cables prevent the system from detecting the boot device.
Solution:
Open your computer case and check for any loose or damaged cables connecting the hard drive or SSD to the motherboard.
If possible, connect the hard drive or SSD to another computer to see if it's detected.
If the drive is not recognized on another computer, it may be defective and needs replacement.
3. Corrupted Boot Sector:
Cause: Corruption in the boot sector or master boot record (MBR) prevents the system from booting properly.
Solution:
Boot your computer from a Windows installation USB or DVD.
Select "Repair your computer" > "Troubleshoot" > "Advanced options" > "Command Prompt."
In the Command Prompt window, type the following commands:
bootrec /fixmbr bootrec /fixboot bootrec /rebuildbcd
Restart your computer and check if the error is resolved.
4. BIOS/UEFI Settings:
Cause: Incorrect BIOS or UEFI settings, such as disabled SATA ports or secure boot settings, can cause boot issues.
Solution:
Access the BIOS/UEFI settings as described earlier.
Ensure that all necessary SATA ports are enabled and that secure boot is configured correctly.
Save the changes and restart your computer.
5. Software Issues:
Cause: Operating system corruption or missing system files can lead to the boot device not found error.
Solution:
Boot your computer from a Windows installation USB or DVD.
Select "Repair your computer" > "Troubleshoot" > "Advanced options" > "Startup Repair."
Follow the on-screen instructions to repair any corrupted system files.
Restart your computer and check if the error persists.
Encountering a "boot device not found" error can be a frustrating experience, but with the right troubleshooting steps, you can resolve the issue and get your computer back up and running smoothly. By understanding the potential causes behind this error and following the solutions outlined in this guide, you can effectively diagnose and fix the problem, ensuring minimal downtime and disruption to your workflow. If you continue to experience issues despite trying these solutions, consider seeking assistance from a professional technician to diagnose and repair any underlying hardware problems.