MBR to GPT error code 215
I am trying to convert a MBR disk to GPT using AOMEI. Disk is boot/system disk and is a Crucial 4TB SSD. I am seeking to convert as I cannot use the full disk under MBR - limited to 4 partitions and 2.2TB.
When I seek to convert I get the 215 error message. But being a SSD defragmentation shouldn't apply. So I assume the issue is something to do with partition size and reserve space as the second part of the error explanation is "...or reserve free space of 2GB or more for the partition, and retry". The disk as partitioned under MBR has:
- a 100MB partition NTFS 512 B/sector \Device\HarddiskVolume1 used 17.88MB free 82.11MB
- a 2TB partition C: OS NTFS 512 B/sector \Device\HarddiskVolume2 used 1.80TB free 207.57GB
- a 576MB partition *: NTFS 512 B/sector \Device\HarddiskVolume3 used 439.57MB free 136.43MB
grateful for any advice
When I seek to convert I get the 215 error message. But being a SSD defragmentation shouldn't apply. So I assume the issue is something to do with partition size and reserve space as the second part of the error explanation is "...or reserve free space of 2GB or more for the partition, and retry". The disk as partitioned under MBR has:
- a 100MB partition NTFS 512 B/sector \Device\HarddiskVolume1 used 17.88MB free 82.11MB
- a 2TB partition C: OS NTFS 512 B/sector \Device\HarddiskVolume2 used 1.80TB free 207.57GB
- a 576MB partition *: NTFS 512 B/sector \Device\HarddiskVolume3 used 439.57MB free 136.43MB
grateful for any advice
Tagged:
Comments
I note the advice on defragging an SSD from the maker of the SSD I am using is:
Should I defrag my SSD?
The short answer is this: you don't have to defrag an SSD.
To understand why, we first need to look at the purpose of defragmenting a drive. Defragging ensures that large files are stored in one continuous area of a hard disk drive so that the file can be read in one go. Mechanical drives have a relatively long seek time of approximately 15ms, so every time a file is fragmented you lose 15ms finding the next one. This really adds up when reading lots of different files split into lots of different fragments.
However, this isn't an issue with SSDs because the seek time are about 0.1ms. You won’t really notice the benefit of defragged files — which means there is no performance advantage to defragging an SSD.
SSDs move data that's already on your disk to other places on your disk, often sticking it at a temporary position first. That's what gives defragmenting a disadvantage for SSD users. You’re writing data you already have, which uses up some of the NAND's limited rewrite capability. So, you get no performance advantage whatsoever, but you are using up some of the limited rewrite capability.
To summarize, do not defrag an SSD
The answer is short and simple — do not defrag a solid state drive. At best it won't do anything, at worst it does nothing for your performance and you will use up write cycles. If you have done it a few times, it isn't going to cause you much trouble or harm your SSD. You just don’t want this to be a scheduled, weekly type thing that takes away from the finite number of SSD rewrites. There are other ways to clean up and increase speed on your computer. There are even reasons for formatting an SSD, encrypting SSDs, and ways to increase storage space on a SSD. They all serve a purpose — there just isn’t a reason to defrag an SSD.
Even so, on the assumption AOMEI conversion to GPT cant deal with an overly fragmented disk, SSD or not, I defragged the system partition on my SSD :-(, sufficiently to reduce AOMEI report of fragmentation from 49% to 25%.
Then I attempted the conversion to GPT again. Sure enough I still got error 215. So I dont think fragmentation is the problem despite the error description leading with that.
And as to free space, there is plenty in each partition and even more unalloacted on the disk
So it seems to me that whatever the problem is, it is not what is reported in the error 215 Information dialog.
[21 ][2023-01-13 01:32:18] disk.cpp(257): Failed to IOCTL_DISK_GET_DRIVE_GEOMETRY. Disk Index: 1
Anyone know what that means, and what needs to be done to fix the problem?
The longer version is I spent a bit of time chasing dead ends using diskpart, and boot configuration, but I'll spare you those.
Posting this because it may be of use to someone else facing a similar problem.
So to be clear, I now have a 2011 HP desktop with a Foxconn 2ADA motherboard and an i7-3770 processor happily running Windows 10 and UEFI/GPT without having to do a clean (re)install of the OS. (NB I had previously successfully upgraded the AMI BIOS to a a version beginning with 8 back in 2015 - I think at the time to run a new NVIDIA graphics card. This was successful and that version of the BIOS had the option for UEFI/secure boot - the original BIOS did not).
Thanks to all who tried to help early last year, and hope this is of use to someone else.
Trying to follow you, I entered Windows recovery options and encountered an error "We can't create a recovery drive on this PC. Some required files are missing". Simultaneously, I've had a recovery partition preinstalled, so I don't know, how to interpret this. Anyway, when trying to resolve the error, I discovered that there should be a directory inside my C:\Recovery folder containing Winre.wim, however on my PC there was neither the directory nor the file, so I inferred I had the exact same problem as you.
As for the file, it was in the C:\Recovery\OEM. I used reagentc in the command prompt to set it correctly:
and then
reagentc /info returns this:
Once this was done, I could create a recovery drive without issues.
My disk was already in GPT format, at least that's what diskpart suggests:
I tried to rerun AOMEI. However, the error persists. What might be causing this issue? Is there something more that needs to be set up?
1) Which motherboard mode Legacy-BIOS, UEFI-CSM, UEFI-nonCSM?
2) What PC brand, year, model #, desktop or laptop?
3) Which SSD type SSHD, SSD 2.5", SSD M.2 SATA, SSD M.2 NVMe?
4) Which hard drive partition table type MBR or GPT?
5) What Aomei product tier Standard, Pro, Other? Version?
6) What Windows version 10, 11, Home, Pro, Enterprise?
7) Please post a screenshot of your issue, and also of
Cmd
Diskpart
list disk
select disk #
list partition
list volume
detail disk