Top 2 Crucial SSD Cloning Software with Full Guide

SSDs are the next evolution of PC storage, which runs faster, quieter, and cooler than the aging technology inside HDDs. In addition, they are more durable and more reliable than HDDs because there's no moving part. Among all kinds of SSDs, Crucial SSD is one of the most famous.

Top 2 Crucial SSD Clone Software for Windows 11/10/8/7

1. AOMEI Backupper

AOMEI Backupper Professional, the best Crucial SSD clone software in Windows 11/10/8/7 can help you migrate data in just a few clicks.

✦ Hard drive cloning: it supports cloning entire disk to another disk, including the Windows operating system, installed applications, and all the other data you will never want to lose.

✦ Intelligent cloning: it allows you to clone larger hard drives to smaller SSD by cloning only used sectors on the source drive. For example, clone 500GB HDD to 250GB SSD.

✦ Sector by sector cloning: it lets you clone all sectors whether used or not, regardless of bad sectors. So, if you want to make an exact copy of the source disk, you can tick this feature.

✦ SSD 4K Alignment: it can help accelerate the reading and writing speed for all the Crucial SSDs, as well as prolong the lifespan.

✦ Wide compatibility: it works well on all Crucial SSDs, including Crucial MX100, Crucial MX200, Crucial MX500, Crucial BX500, M500 Series, etc. It also supports other branded SSDs, such as WD SSD, Samsung SSD, and SanDisk SSD.

✦ Easy-to-use and user-friendly: it has a simple and clear interface and you can complete the cloning job in only a few clicks.

2. Crucial SSD Install Kit

If you are planning to upgrade HDD to Crucial SSD in your desktop PC systems, maybe the Crucial easy desktop install kit for SSD could help you, and it’s available on the Crucial official site if you pay 17.49 dollars.

The kit includes a SATA-to-SATA data transfer cable, a USB-to-SATA data transfer cable, a 2.5-inch to 3.5-inch adapter bracket, and mounting screws. It also offers Crucial migration software - Acronis True Image for Crucial. The Crucial SSD clone software is free to download here.

Full Guide: How to Clone HDD to Crucial SSD in Windows

Before you do the clone job, please connect Crucial SSD to your PC, and make sure it can be detected. Also, download and install AOMEI Backupper on your PC. Then we’ll show you the detailed steps about the Crucial SSD clone.

Important: Please backup important files first on your Crucial SSD if there is any important data stored because the cloning operation will overwrite the Crucial SSD.

1. Crucial Hard Drive Clone via AOMEI Backupper

1. Launch the best Crucial cloning software. Then select “Disk Clone” under the “Clone” tab.

2. Select the HDD (system disk or data disk) as the source disk.

3. Select the Crucial SSD as the destination disk.

4. Tick "SSD Alignment" to accelerate the reading and writing speed of the destination SSD. Then, click “Start Clone”.

Tips:

✍ The “Edit Partitions” offers two options ("Add unused space to all partitions" and "Manually adjust partition size") to help you make full use of disk space on a larger destination disk.

✍ The “Sector by sector clone” feature will clone every sector on HDD no matter if it is used or not, even blank or bad.

✍ If you want to migrate only OS to Crucial SSD, you need to use the "System Clone" feature.

2. Crucial Disk Clone via Acronis True Image for Crucial

Before you start, please note that the Acronis True Image for Crucial requires a Crucial BX-series, MX-series, P-series or portable X-series SSD to be connected to the system (using either a SATA cable or SATA-to-USB adapter), or the program can’t be installed or run.

1. Get Acronis True Image for Crucial free download. Install and launch this Crucial data transfer software on your PC. On the sidebar, click Tools, and then click Clone Disk.

2. On the Clone Mode step, it is recommended to choose the Automatic transfer mode so that the partitions will be proportionally resized to fit your new hard drive.

3. On the Source Disk step, select the disk that you want to clone.

4. On the Destination Disk step, select the Crucial SSD for the cloned data.

Note: If any disk is unpartitioned, the program will automatically recognize it as the destination and bypass this step.

5. On the Finish step, ensure that the configured settings suit your needs, and then click Proceed.

By default, the Crucial SSD migration software - Acronis True Image for Crucial shuts down the computer after the clone process finishes. This enables you to change the position of master/subordinate jumpers and remove one of the hard drives.

Limitations of Acronis True Image for Crucial

It is not difficult to run Acronis True Image for Crucial SSD cloning. However, you may get disappointed for the following reasons:

1. It only supports cloning BX-series, MX-series, P-series, or portable X-series SSD.
2. You are not allowed to use other features unless you upgrade to the full product, such as backup, sync, or dashboard.
3. It is probably not working. For example, you may receive errors on the source disk that prevent you from cloning. Also, it even does not recognize Crucial SSD.
4. If you are disappointed with the limitations of Acronis, please turn to the best Crucial clone tool introduced before.

Therefore, if you are facing any of the above issues, make sure to try the other solution - AOMEI Backupper.

Extended Reading: Crucial SSD Overview

Crucial SSD is a part of Micron - one of the largest memory manufacturers in the world and has been developed since the earliest days of solid-state drives. Crucial SSDs such as Crucial BX500, Crucial MX200, Crucial MX500, Crucial BX100, etc. are popular in the market.

If you are considering choosing one of them for better performance, you may want to migrate data to Crucial SSD directly, because as we all know, it’s a time-consuming job to re-install the operating system as well as all other applications. Just follow the offered guide to make it.

FAQs about Crucial SSD Cloning

1. Does Crucial offer cloning software?

Yes, there is a piece of software named Acronis True Image for Crucial. However, it doesn’t come with Crucial SSDs. You should download it from the Crucial website by yourself.

2. Can I clone my HDD to a Crucial SSD using different cloning software?

Yes, various third-party tools like AOMEI Backupper support Crucial clone hard drive to SSD. Also, they offer more useful clone options, such as “SSD Alignment” and “Sector by sector clone”.

3. Can I clone my HDD to a Crucial SSD with a different storage capacity?

Yes, you can clone your hard drive to a larger or smaller Crucial SSD. Just ensure that the target SSD has sufficient space to accommodate all the data from the source HDD.

Conclusion

Acronis True Image for Crucial only supports cloning BX-series or MX-series Crucial SSD, and the cloning process may fail sometimes. Thus, it's suggested to use a different Crucial cloning software - AOMEI Backupper.

It allows you to clone both the system disk and data disk without any obstacle, and it supports all branded SSDs, including Crucial SSD, Samsung SSD, WD SSD, Lenovo SSD, etc.

What's more, AOMEI Backupper is a potent Windows backup software. It offers all-around computer backup solutions, such as system backup, disk backup, file backup, automatic file sync, and more. It can be the best assistant to ensure data safety. Please download it to explore yourself.