Get prepared for Microsoft Surface Pro 4 SSD upgrade
Upgrading the SSD of your Microsoft Surface Pro 4 opens a gateway to a myriad of advantages, transforming your device into a powerhouse of performance and efficiency. Before upgrading the SSD on your Surface Pro 4, please make the following preparations:
1. Check Compatibility
- Ensure the new SSD matches the Surface Pro 4's specifications (typically M.2 SATA or NVMe drives).
- Verify storage size and interface type to avoid compatibility issues.
2. Backup Your Data: Use cloud storage or external drives to back up important files.
3. Gather Tools: Get precision screwdrivers, a plastic prying tool, and an anti-static wrist strap to safely disassemble the device.
4. Download Disk Clone Software
When it comes to upgrading the SSD on your Surface Pro 4, having reliable disk cloning software can streamline the entire process, ensuring data integrity and system continuity. AOMEI Backupper Professional stands out as an exceptional choice.
🌟 Multiple choices: Use the Disk Clone feature to transfer everything from one hard drive to another and use the System Clone feature to transfer OS only. Also, you can copy a specific partition via the Partition Clone feature. 🌟 Intelligent Clone: It allows you to clone larger HDD to smaller SSD only if the destination disk is large enough to store data on the source disk. 🌟 High compatibility: It supports various disk types, including SATA/IDE/PCIe disk, M.2 drive, NVMe SSD, etc.
Don’t hesitate to download and install AOMEI Backupper on your computer.
Easiest hard drive clone software for Windows PC.
Stepwise guide to Microsoft Surface Pro 4 upgrade SSD
Replacing the SSD on a Surface Pro 4 requires careful attention to detail and following specific steps to ensure a successful upgrade without damaging the device. Here's a step-by-step guide on how to upgrade the SSD on your Surface Pro 4:
Step 1. Clone old SSD to new SSD
1. Connect the new SSD to your laptop. You can use an external enclosure or SATA-to-USB adapter to connect it.
2. Launch AOMEI Backupper. Click on the "Clone" tab located on the left sidebar. Under the "Clone" tab, choose the "Disk Clone" option.
3. Select your Surface Pro 4 SSD as the source disk and the new SSD as the target disk.
4. Improve the new SSD performance by enabling “SSD Alignment”. Then initiate the cloning process by clicking “Start Clone”.
Step 2. Swap old SSD for new SSD
1. Power Off Your Surface Pro 4
Ensure that your Surface Pro 4 is completely powered off before proceeding with the SSD replacement. Disconnect any peripherals and remove the power adapter.
2. Remove the Kickstand (Optional)
If your Surface Pro 4 has a removable kickstand, gently detach it by pressing the release button located near the hinge.
3. Access the SSD Compartment
Using a small Phillips-head screwdriver, carefully remove the screws securing the bottom cover of your Surface Pro 4. Once the screws are removed, gently lift off the cover to reveal the internal components.
4. Replace the Old SSD
Locate the existing SSD inside your Surface Pro 4. Depending on the model, it may be secured with screws or held in place by a connector. Carefully disconnect the SSD and remove it from the device. Install the new SSD in the same location and secure it according to the manufacturer's instructions.
5. Reassemble Your Surface Pro 4
Once the new SSD is installed, carefully reattach the bottom cover of your Surface Pro 4 and secure it with the screws. If you removed the kickstand earlier, snap it back into place until it clicks securely.
6. Power On and Initialize
With the new SSD installed, power on your Surface Pro 4 and follow the on-screen prompts to initialize the drive. You may need to install drivers or perform additional setup steps depending on your specific configuration.
Why replace SSD on Surface Pro 4?
Here are some of the main benefits:
- Improved Performance: Upgrading to a faster, larger SSD can significantly enhance your device’s speed, responsiveness, and overall system performance.
- Increased Storage Capacity: The original SSD in the Surface Pro 4 may not provide enough storage for your needs. Upgrading to a higher-capacity drive allows you to store more files, applications, and media.
- Better Reliability: Older SSDs can degrade over time. Replacing the SSD ensures your device runs more reliably and reduces the risk of data loss or system crashes.
- Extended Lifespan: By upgrading the SSD, you can give your Surface Pro 4 a new lease on life, extending its usability and improving its ability to keep up with newer software demands.
- Cost-Effective Upgrade: Instead of purchasing a new device, upgrading the SSD is a more affordable way to significantly enhance the performance and usability of your Surface Pro 4.
FAQs about Surface Pro 4 SSD upgrade
1. Is the Surface Pro 4 SSD upgradeable?
Yes, you can upgrade the SSD in a Surface Pro 4. However, it requires disassembling the device, so make sure you’re comfortable with the process or seek professional help.
2. Can you add storage to Surface Pro 4?
Yes, external hard drives (HDDs) and solid-state drives (SSDs) offer a fast, affordable way to expand your Surface Pro’s storage without needing to open the device. Simply connect a USB-C or USB-A external drive to gain extra space for files, backups, and media.
3. How long does the upgrade take?
The upgrade process typically takes 1–2 hours, depending on your familiarity with disassembling the device and the amount of data to be transferred.
To sum up
Surface Pro 4 SSD upgrade is a game-changing investment in both performance and longevity. By leveraging the advantages of SSD technology and following proper installation and optimization steps, users can enhance productivity and unlock greater creativity with their device.
Actually, AOMEI Backupper is far more than a disk cloning tool. It can also help you with automatic file sync, system backup, and universal restore, etc. Try it now to discover more!
✍ You May Also Like
Best Free Disk Cloning Software for Windows 10 (Easy & Safe)